Known problems with specific applications and solutions

From Wippies Wiki

Known problems with specific applications and solutions

μ Torrent

How to set up µtorrent.

When μ torrent is running, go into the settings in the μtorrent program, on the Setup select the connections of the window on the left opened up the tab when and where you should enable uPnP port mapping, in the same tab in μ torrent activate the option for Windows XP's firewall and PnP-portmapping , Must sometimes also use the option randomize ports when μ torrent start but not always.

After this is done in μ torrent, so for safety's sake (not at all ISP's, but make this mandatory) also restart the computer so that the Register is updated properly.

DC++

Start DC++.

Make sure you are installing with Administrator rights actively. Click on Filemenu at the top of the screen. Select settings in the drop-down list. Make sure Active is selected. Sometimes, but not always, your external IP address entered in the IP box. But try to leave it blank to begin with. Type in the port for DC++ TCP and UDP port boxes. Take a port between 23000 and 60000, it is most likely that the ISP has not been allocating those for other purposes. Then, make sure that the computer has a static IP address.

DC + + AND VISTA

The latest version of the DC + + works with vista and the Homebox just as above, only to see that you install with Administrator rights, when you see UAC prompt. In addition, make sure you run DC++ with administrator rights (right-click on DC++ shortcut and select Run as administrator).

Karl.S